SPECIFICATION
MACHINE APPLICATION & USEGE:

>> Boiler Tank , Air Conditioning Channels, Sheet Metal Cover
>> Cone Making & other Aluminum & Steel Fabrication, Marine & Ship Building, Pressure Vassals, Wind Mills

 

MODEL TYPE

WORKING LENGTH MM

TOP ROLL MM

PREBENDING CAPACITY
MM

BOTTOM ROLL MM

MOTOR
HP

RPB - 1

1250 X 3

100

1

90

2

RPB - 2

1250 X 6

125

3

105

3

RPB - 3

1250 X 10

150

6

125

5

RPB - 4

1250 X 12

175

8

140

7.5

RPB - 5

1250 X 16

190

10

150

7.5

RPB - 6

1250 X 20

200

12

160

10

RPB - 7

1250 X 25

240

16

200

15

RPB - 8

1500 X 3

115

1

100

3

RPB - 9

1500 X 6

140

3

115

5

RPB - 10

1500 X 10

160

6

135

7.5

RPB - 11

1500 X 12

180

8

150

7.5

RPB - 12

1500 X 16

200

10

160

10

RPB - 13

1500 X 20

215

12

170

12.5

RPB - 14

1500 X 25

250

16

215

20

RPB - 15

2000 X 6

160

3

135

5

RPB - 16

2000 X 10

185

6

150

7.5

RPB - 17

2000 X 12

205

8

160

10

RPB - 18

2000 X 16

215

10

175

12.5

RPB - 19

2000 X 20

230

12

190

15

RPB - 20

2000 X 25

275

16

230

20

RPB - 21

2500 X 6

175

3

150

7.5

RPB - 22

2500 X 10

200

6

170

10

RPB - 23

2500 X 12

230

8

180

15

RPB - 24

2500 X 16

240

10

200

20

RPB - 25

2500 X 20

260

12

215

20

RPB - 26

2500 X 25

300

16

260

30

RPB - 27

3000 X 10

240

6

200

15

RPB - 28

3000 X 12

260

8

220

20

RPB - 29

3000 X 16

275

10

225

20

RPB - 30

3000 X 20

290

12

250

25

RPB - 31

3000 X 25

340

16

290

40
 
Technical Features :

>> Bottom roll are fixed and driven by Gears and warm Reduction Gear Box. Top Roll rotates in fixed positions and can be adjusted up & down manually by adjustable screws.

>> Housing are made from M.S. Plate of suitable strength and mounted on heavy base frame. Rolls are made from forged steel and perfectly machined for accurate result.

>> For longer life and smooth working of machine, Gun Metal Bushes are provide and given sufficient lubrication system.

 
Bending Process:

>> Place the Plate between bottom and top rolls by adjusting top roll manually.

>> Down the top roll and give pressure on the plate. Then start Main motor in clock wise direction till one end of the plate comes over first bottom roll reverse the motors and get second end on second bottom.

>> Continue above process until you et desired as shown in picture.

 
Note:

>> We reserve all rights to change above specifications and dimensions without any prior notice. For better performance and continuous improvement said specifications can be changed.

 

 
Previous

|

Top